Mohamed ArshadProfessional,high quality,good service
JohnA great variety of goods， good package，good production line，High-end product，Pay attention to details
BillotReliable , good supervision of production
Aluminum Alloy Air Filter Regulator For Pneumatic Actuator
|Name||Pneumatic Filter Regulator||OEM||Acceptable|
|Pressure Range||0.05 ~ 0.85 MPa||Material||Aluminum Alloy|
|Place Of Origin||Wuxi, China||Fluid||Air|
Aluminum Alloy Air Filter Regulator,
CE Air Filter Regulator,
Actuator pneumatic filter regulator
Aluminum Alloy Air Filter Regulator / Filter Pressure Regulator For Pneumatic Actuator
Flowan Filter-Regulators, combine the functions of both filter and regulator, are compact and most effective when space is constrained.
FILTER: Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off. Sediment should not be permitted to fill above the lower baffle. Wash filter element at intervals with methylene chloride or similar cleansing fluid to maintain filtering efficiency. To clean element, depressurize system, pull down the lock and twist off the metal guard and polycarbonate bowl and unscrew element from head. Dry filter element thoroughly before reassembling. Clean filter bowl(s) only with soapy water. Inspect O-ring, replacing if damaged or distorted. Reassemble with care to avoid stripping threads on bowl. After a metal bowl with sight is tightened, it may be rotated up to 180° (for proper viewing.)
REGULATOR: Before supplying the air, turn the adjusting knob counter-clockwise until compression is released from the control spring. Turn on the air supply and adjust the knob to set the desired secondary pressure by turning the knob clockwise.
Note: Adjustment knob must be pulled away from the body of the regulator to operate. After desired secondary pressure is set, pushing the knob back towards the body will lock the control knob.
IMPORTANT: Use care to avoid screwing fittings too far into body of units as it may close internal ports. Normally finger tight plus one turn will seal. Bowl (Metal or Polycarbonate) and Drain (Auto or Manual) Options available.
Carton or as per your request
Shipped within 10 days after payment
1. Are you a factory or trading company?
We are a manufacturer, specialized in production, R&D and marketing filed, with more than
ten years experience in this industry.
2. Do you accept OEM business?
Yes, OEM is acceptable.
We provide 1 year as warranty period after since delivery time. We can repair or change the
problem products which caused by quality during the warranty time.
By air, by sea or DHL, UPS, FedEx, or as per customer request.
T/T, Western Union. For large amount, 30% as deposit, 70% balance before shipmen;
For small amount, 100% payment in advance is preferred.
More information, please do not hesitate to send us email: firstname.lastname@example.org