ON-OFF quater turn Aluminum Alloy Rotary electric actuator for Liquid Solid Gas​ ​

• Product Features

1. Strong features: intelligent regulation type, proportion type, switch type various signal output type, everything that you expect to find;

2. Small and light: it’s volume and weight are merely equal to about 35% of traditional products;

3. Elegant appearance: aluminum alloy cast shell refined and fluent reducing electromagnet tic interference;

4. Reliable performance: key components like shaft bearings and electrical elements are imported famous-brand produces;

5. High protection standard: IP 68 high standard protection level [detected by Shanghai instrumentation and autonomous system inspection and test institute);

6. Precise and wear resistant: The worm wheel output shaft adopts integrated forging from special copper base alloy, and has high strength and good wearability;

7. Extremely small return difference: its integrated structure avoids the gap of key-joints, and has high driving accuracy;

8. Safety guarantee: it has passed 1500 V voltage endurance detection, it has class F insulation electromotor, and it has CE accreditation, so it has higher safety guarantee;

9. Simple to mate: it adopts single phase power supply and simple connection loop, and we can also make it 380 V or DC

10. Convenient to use: no need to oil and no need to make spot-check, and it is waterproof and rust-proof, and can install at any angle;

11. Multi-speed: its whole range time is 9 Seconds, 13 Seconds, 15 Seconds, 30 Seconds, 50 Seconds, 100Seconds, and 150 Seconds (already set when leaving factory);

12. Intelligent digital control: the intelligent control module is integrated in the electric actuator, so it need not connect an external localizer; digital setting, digital calibration, high precision, self-diagnosis, and multiple – feature in one device.

• Product Specifications

Torque Range	7-2000Nm
Motion Range	0-270°,0-90°
Ambient Temp.	—30℃~ + 60℃
Working Pressure	0-4.0Mpa(40Bar)
Open/Close Time	7S-100S
Number of wires	2-7Wires
Actuator Body	Aluminum Alloy
Protection Class	IP67,IP68
Voltage	24V DC,110V AC,220V AC,380V AC
Type	On-Off,Modulating(Regulating),Passive Contact
Available Valve Size	Ball Valve(DN15-DN200);Butterfly Valve(DN25-DN400)

• Technical data

Model	Max output torque	On-off time 60/50HZ	MAX bore size	F-class Motor	Rated Current (A) 50HZ				Handwheel Turn	Weight
					Single Phase		Three Phase
	N·m	S	mm	W	110V	220V	380V	440V	N	kg
FLDCL-005	50	18/22	20	20	1.10/0.95	0.55/0.54	0.3/0.3	N/A	10	7.5
FLDCL-010	100	18/22	20	20	1.10/0.95	0.55/0.54	0.3/0.3	N/A	10	7.5
FLDCL-015	150	21/25	22	40	1.65/1.67	0.88/0.84	0.31/0.31	0.30/0.31	11	17.3
FLDCL-020	200	21/25	22	40	1.67/1.67	0.89/0.85	0.31/0.31	0.30/0.31	11	17.3
FLDCL-040	400	26/31	35	90	1.85/1.86	0.92/0.92	0.35/0.35	0.34/0.34	13.5	22
FLDCL-060	600	26/31	35	120	3.65/3.62	1.60/2.20	0.60/0.59	0.59/0.58	13.5	23
FLDCL-080	800	31/37	45	180	4.10/4.10	2.15/2.20	0.85/0.85	0.79/0.79	16.5	29
FLDCL-120	1200	31/37	45	180	4.20/4.10	2.35/2.30	0.87/0.87	0.81/0.81	16.5	29
FLDCL-200	2000	93/112	65	180	4.10/4.10	2.15/2.20	0.85/0.85	0.79/0.79	49.5	75

• Material

Actuator Cover	Waterproof level IP67/68, or NEMA 4/6
Motor	Squirrel-cage Asynchronous Motor
Limit Switch	1 * on/off, SPDT, 250VAC 10A
Auxiliary Switch Set	1 * on/off, SPDT, 250VAC 10A
Torque Switch	1 * on/off, SPDT, 250VAC 10A	Except OHQ-005/OHQ-010
Stroke	90° ± 10°	Option: 0° – 270°
Failure Protection Temperature	Internal thermal protection; On: 115°C ± 5°C, off: 97°C ± 5°C
Indicator	Continuous position indicator
Manual Operate	Mechanical clutch, operate with handwheel
Self-lock Device	Self-lock by worm and worm gear
Mechanical Stops	External adjusting bolts (2 piece)
Heater and Thermostat	7-10W (110/220V AC)
Connecting hole	PF 3/4” (2 pieces)
Ambient Temperature	-20°C ~+70°C
Lubrication	Aluminum-base grease (EP type)
Material	Steel, Aluminum alloy, Aluminum bronze, Polycarbonate
Ambient Humidity	Max 90% RH
Anti-vibration	X Y Z 10g, 0.2~34HZ, 30 minutes
External Coating	Dry powder, Epoxy polyester, high anti-corrosion

• FAQ

1. Are you a factory or trading company?

We are a manufacturer, specialized in production, R&D and marketing filed, with more than

ten years experience in this industry.

2. Do you accept OEM business?

Yes, OEM is acceptable.

3. Warranty

We provide 1 year as warranty period after since delivery time. We can repair or change the

problem products which caused by quality during the warranty time.

4. Shipment

By air, by sea or DHL, UPS, FedEx, or as per customer request.

5. Payment

T/T, Western Union. For large amount, 30% as deposit, 70% balance before shipmen;

For small amount, 100% payment in advance is preferred.