Standard port design Cast Steel Pneumatic Gate Valve with Bolted Bonnet

Product Description

Gate Valve is used when the need exist for a device that allows an interruption or cut off the flow of a fluid. It is not recommendable to use Gate Valves for flow modulation as the high velocity of the through may result in erosive damage to the wedge and seats when the valve is partially opened. Under normal operating conditions, the valve should remain either fully open or fully closed. Gate Valve is widely used for the medium of water, steam, air, oil, petroleum and petroleum products, nonaggressive fluids.
Applicable Standard
Design Standard: API 600, ASME B16.34, API 603, DIN 3352
Face to Face: ANSI B16.10, EN 558-1
End Flange: ANSI B16.5, ANSI B16.47, EN 1092-1
Butt welding Ends: ANSI B16.25, DIN 3239
Inspection and Test: API 598, DIN 3230, EN 12266-1
Products Range
Size: 2″-24 ”
Rating: ANSI 150lb -2500lb(PN20-PN420)
Body Materials: WCB,WC6,WC9,LCB,LF2,CF8, CF8M, CF3, CF3M, CN7M, A890 4A, A890 5A etc.
Operation: Hand wheel, Gear, Electric, Pneumatic
Design Features
Standard port design
OS&Y, outside and screw
Bolted bonnet, back seal structure
Flexible wedge, fully guided
Thread or welded seat
Extended stem design for low temperature
Flanged or butt-welding Ends

Product Specifications

​

Features

1. OS&Y Outside Screw and Yoke,
2. Bolted Bonnet or Pressure Sealed Type
3. Solid, Flexible or Split Wedge Design
4. Rising stem or Non-rising stem
5. Back-seating, Renewable Seat Ring
6. Full Port Or Reduced Bore
7. Optional Upset forged T-head Stem Design
8. NACE MR-01-75

Quality Control

As well as the standard API and EN hydrostatic and pneumatic valve leak testing, Flowan can offer the most advanced testing to meet the severest of applications and customer as below:
Fugitive emission test
Performance test
Functional test
Low pressure gas test
High pressure gas test
High temperature test
Low temperature and cryogenic test

Packing and Delivery

Packing Details : Standard export wooden case or as your request

Delivery Details : 20-30 days after order depend on your quantity

FAQs

1. Are you a factory or trading company?

We are a manufacturer, specialized in production, R&D and marketing filed, with more than

ten years experience in this industry.

2. Do you accept OEM business?

Yes, OEM is acceptable.

3. Warranty

We provide 1 year as warranty period after since delivery time. We can repair or change the

problem products which caused by quality during the warranty time.

4. Shipment

By air, by sea or DHL, UPS, FedEx, or as per customer request.

5. Payment

T/T, Western Union. For large amount, 30% as deposit, 70% balance before shipmen;

For small amount, 100% payment in advance is preferred.