Intelligent explosion proof high temperature rotary electric actuator DC AC 12- 40V

Product specifications

Item	Electric Actuator
Rated Power	10W/20W
Product Application	Valves Operation For Liquid, Solid, Gas and Others
Product Weight	2.4kg
Rated Current	0.15A/0.24A/0.48A/2.2A/0.21A/2A/3.8A
Control Circuit	Type A,B,C,D,E,F,G,H
Compression Strength	500VAC/Minute
Protection Level	IP65
Selection Function	Heating Dehumidification

Product Features:

1. Strong features: intelligent regulation type, proportion type, switch type various signal output type, everything that you expect to find;

2. Small and light: it’s volume and weight are merely equal to about 35% of traditional products;

3. Elegant appearance: aluminum alloy cast shell refined and fluent reducing electromagnet tic interference;

4. Reliable performance: key components like shaft bearings and electrical elements are imported famous-brand produces;

5. High protection standard: IP 68 high standard protection level [detected by Shanghai instrumentation and autonomous system inspection and test institute);

6. Precise and wear resistant: The worm wheel output shaft adopts integrated forging from special copper base alloy, and has high strength and good wearability;

7. Extremely small return difference: its integrated structure avoids the gap of key-joints, and has high driving accuracy;

8. Safety guarantee: it has passed 1500 V voltage endurance detection, it has class F insulation electromotor, and it has CE accreditation, so it has higher safety guarantee;

9. Simple to mate: it adopts single phase power supply and simple connection loop, and we can also make it 380 V or DC

10. Convenient to use: no need to oil and no need to make spot-check, and it is waterproof and rust-proof, and can install at any angle;

11. Multi-speed: its whole range time is 9 Seconds, 13 Seconds, 15 Seconds, 30 Seconds, 50 Seconds, 100Seconds, and 150 Seconds (already set when leaving factory);

12. Intelligent digital control: the intelligent control module is integrated in the electric actuator, so it need not connect an external localizer; digital setting, digital calibration, high precision, self-diagnosis, and multiple – feature in one device.

Installation environment requirement:

1. The product can be installed indoors or outdoors;

2. The product is not explosion protection product so please avoid flammable and explosive environment;

3. In an environment where there is rainwater, raw material splatter, and sunlight direct radiation on long term, you must install a protective hood to shield over the whole electric actuator.

4. Please reserve room for wiring, manual operation and installation and repair work;

5. Periphery environmental temperature should keep in 30 – 60℃range; Note: when using it in environment of big temperature difference or below zero point, you should use the model which has heater dehumidifier to prevent moisture condensation.