-
Valve Pneumatic Actuator
-
Rack And Pinion Pneumatic Actuator
-
Scotch Yoke Pneumatic Actuator
-
Linear Pneumatic Actuator
-
Valve Electric Actuator
-
Industrial Butterfly Valve
-
Flanged Ball Valve
-
Flanged Control Valve
-
Flanged Gate Valve
-
Valve Limit Switch Box
-
Pneumatic Solenoid Valve
-
Air Filter Regulator
-
Electro Pneumatic Positioner
-
Valve Hydraulic Actuator
-
Industrial Globe Valve
-
Industrial Electric Motors
-
Mohamed ArshadProfessional,high quality,good service
-
JohnA great variety of goods, good package,good production line,High-end product,Pay attention to details
-
BillotReliable , good supervision of production
Ball Valve Air Torque Pneumatic Actuator Corrosion Resistance
FACTORY | FLOWAN | MIN QTY. | 1PC |
---|---|---|---|
SAMPLE | AVAILABLE | COLOR | OPTIONAL |
OEM SERVICE | AVAILABLE | BRAND | FLOWAN |
High Light | ISO air torque pneumatic actuator,8 Bar air torque pneumatic actuator,800kpa pneumatic valve actuator |
Ball Valve pneumatic actuator pneumatic actuator
► FEATURE
— Self energizing V-Seal piston ring.
— Double rack & pinion.
— High corrosion resistance.
— Pinion supported on polyacetal bearings.
— Maximum working pressure 8Bar. Optional 10Bar.
— No lubrication required.
— Temperature range -40 °C to +150 °C.
— Anodized body inside and out.
— Hard anodized pistons.
— ISO mounting for interchangeability.
— Anti-blowout pinion.
— Can be converted to spring return by just adding springs.
— Smooth burnished cylinder wall.
► Installation of Actuator:
FLOWAN actuators are mounted directly to valves or adapted to the valve by means of an intermediate bracket and coupler. The coupler adapts the output of the actuator to the valve shaft. Standard mounting kits provide mounting of the actuator in the direction of the pipe. Pipelines can be horizontal, vertical, or other positions. When mounting the actuator to a valve using a mounting kit, the pinion drive, coupling device and valve stem should be centered and concentric to prevent any side loading to the bottom pinion radial bearing and valve stem seal area.
After mounting, it may be necessary to adjust the end of travel stop for proper open or closed valve position.Pneumatically stroke the actuator several times to assure proper operation with no binding of the coupler.
► Workshop: